Overalls vs coveralls
Bib overalls cover the legs and chest and are held up by shoulder straps, worn over a shirt. Coveralls (boiler suits) are one piece with sleeves and cover the whole body. Navy and royal blue are traditional work colors because they hide grease and dirt better than lighter shades.
Fabric choices
| Fabric | Strengths | Watch out for |
|---|---|---|
| Cotton twill or duck | Breathable, tough; won't melt | Untreated cotton can ignite and keep burning |
| Polyester-cotton blend | Holds color, resists wrinkles, cheaper | Synthetics can melt onto skin in a fire |
| Flame-resistant (FR) fabric | Self-extinguishes; rated for specific hazards | Costs more; check the label for the standard |
Ergodyne's FR guide notes that untreated cotton ignites at about 480°F (250°C), while polyester and nylon melt readily. Industry guidance quoting OSHA says workers exposed to flame or arc hazards are generally not allowed to wear synthetic or synthetic-blend clothing, and that heavy 100% cotton or wool may be acceptable because it won't melt, though it can still burn.
Flame-resistant garments: NFPA 2112 vs NFPA 70E
If you work around flammable vapors or energized electrical equipment, an ordinary pair of blue coveralls isn't enough. Two standards come up most often, and passing one doesn't mean a garment passes the other.
- NFPA 2112 (flash fire). Covers garments for flash fire, such as in oil and gas work. Garments must be third-party tested and certified and carry the certifier's mark. Testing reports predicted body burn, and a garment passes at 50% or less.
- NFPA 70E (electrical arc flash). Arc protection is shown as an arc rating in cal/cm² (ATPV or EBT). The rating is based on the fabric and is self-declared by the maker. Category 2 FR clothing, for example, needs a minimum arc rating of 8 cal/cm².
For electric power work, OSHA's rule (29 CFR 1910.269(l)(8)) requires employers to make sure exposed workers don't wear clothing that could melt onto skin or ignite and keep burning. Look for the standard and rating printed on the garment label. A claim of general flammability testing alone (for example, CPSC 16 CFR 1610) doesn't show arc-flash or flash-fire protection.
High-visibility options
Plain blue isn't high-visibility. If you work near traffic or moving equipment, look for coveralls or overalls labeled to ANSI/ISEA 107. The 2026 edition keeps the familiar garment types (O, R and P) and performance classes (1, 2, 3 and E), and the same fluorescent background colors: yellow-green, orange-red and red. Many hi-vis coveralls combine a blue lower body with fluorescent panels and reflective tape.
Sizing and fit
- Coveralls are sized by chest, with regular, short and tall lengths. Measure over the clothes you'll wear underneath.
- Check torso length: too short and the crotch binds when you bend or kneel.
- Bib overalls are sized by waist and inseam; adjustable straps fine-tune the rise.
- FR garments should fit loosely enough to move but not hang where they can snag. Wear FR or natural-fiber layers underneath, not synthetics.
Quick checklist
- What hazards does the job have: dirt only, flash fire, arc flash, traffic?
- If FR is needed, which standard and rating does the label show?
- Is the fabric heavy enough for the work and climate?
- Do zippers, knee pads, pockets and tool loops suit the job?
- Does it fit with your usual layers, bending and kneeling?